Telit LM960 question

Misc Mini PCI-E and M.2 Modem Card Topics
Post Reply
lteoptions
Posts: 5
Joined: Tue Mar 10, 2020 7:51 pm
Has thanked: 0
Been thanked: 1 time

Telit LM960 question

Post by lteoptions » Wed Mar 11, 2020 11:43 pm

I have placed an order for the Telit LM960 CAT 18. In looking at the specs I cannot determine what cabling hardware I need. I looks like there are 5 antenna ports. I am a total noob so I don't know what I need to go from the card to the enclosure for the antennas to hook to. I am certain I can solve that. I am no so certain I can solve what antennas I need to make this thing jam. Still reading but any assistance is appreciated.

Ty

User avatar
BillA
Posts: 922
Joined: Sun Dec 01, 2019 6:46 pm
Location: USA
Has thanked: 154 times
Been thanked: 191 times
Contact:

Re: Telit LM960 question

Post by BillA » Thu Mar 26, 2020 5:16 am

lteoptions wrote:
Wed Mar 11, 2020 11:43 pm
I have placed an order for the Telit LM960 CAT 18. In looking at the specs I cannot determine what cabling hardware I need. I looks like there are 5 antenna ports. I am a total noob so I don't know what I need to go from the card to the enclosure for the antennas to hook to. I am certain I can solve that. I am no so certain I can solve what antennas I need to make this thing jam. Still reading but any assistance is appreciated.

Ty

You can run it with just 2 antennas (Main-1/Diversity-1), but to get the full 4x4 MIMO performance you need to connect the additional two (Main2/Diversity-2) antennas. That modem uses the small IPEX MHF4 connectors.

Post Reply