Have a mofi 4500 and LTEFix WG3526 load balanced by a TL-R600VPN (cat5 from that to PCs) and then a Wifi5 TP Link 1900AC router for good strong wifi (covers every spot in the home, antennas in LTE routers turned off). Speeds range from 5-20mb (I am a long way from towers/lots of trees this is best I can get, peaks sometimes near 40 though)
I can't figure out how to put the WG into bridge mode
How put WG3526 in bridge / pass through mode
Forum rules
Use the SEARCH function for related issues PRIOR to posting for assistance.
Use the SEARCH function for related issues PRIOR to posting for assistance.
Re: How put WG3526 in bridge mode
Edit: Found in search: https://ltehacks.com/viewtopic.php?f=9& ... dge#p16979
Sounds like it is not possible with the openWRT software on WG3526? That still the case? Should I switch to something else (software wise)?
Edit 2: Will try this: https://ltehacks.com/viewtopic.php?f=8& ... 0c1#p15084
Sounds like it is not possible with the openWRT software on WG3526? That still the case? Should I switch to something else (software wise)?
Edit 2: Will try this: https://ltehacks.com/viewtopic.php?f=8& ... 0c1#p15084