Linksys Wrt3200acm with EM7565

Internet Speed Test Results, Links, and Discussions
Forum rules
Use the FORM MODE button to post
User avatar
Jflex113
Posts: 25
Joined: Thu Mar 15, 2018 2:13 am
Location: Small town in Michigan

Linksys Wrt3200acm with EM7565

Post by Jflex113 » Sun Apr 29, 2018 3:00 pm

Edit: Just so everyone knows, this is with 2xCA there is no 3xCA being broadcast in my area.
Carrier:
Verizon
Distance_to_Tower:
3.1 to 4 Miles
Type_of_Device:
Linksys Wrt3200acm
Type_of_Modem:
Sierra Wireless EM7565
Firmware:
Custom ROOter on 4.9 Kernel
Antenna_Setup:
2 Wideband yagi's in a 90° MIMO configuration
Cable_Type:
5ft of LMR240
Speedtest_Photo_1:
EM7565 05.58 3-24-2018 Location - Home.jpg
EM7565 05.58 3-24-2018 Location - Home.jpg (33.21 KiB) Viewed 3749 times
Speedtest_Photo_2:
EM7565 06.28 3-24-2018 Location - Home.jpg
EM7565 06.28 3-24-2018 Location - Home.jpg (31.25 KiB) Viewed 3749 times
"If you're going to be ignorant, you'd better be rich." - Cody D.

fjguyote
Posts: 11
Joined: Mon May 07, 2018 8:53 am

Re: Linksys Wrt3200acm with EM7565

Post by fjguyote » Tue May 08, 2018 10:02 am

Looks good. Any ideas on getting the EM7565 working well with the WG3526 LTE CAT6? Would your custom ROOTer translate well over to it?

User avatar
Jflex113
Posts: 25
Joined: Thu Mar 15, 2018 2:13 am
Location: Small town in Michigan

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 » Tue May 08, 2018 10:11 am

The Em7565 is m.2 not mPcie, so unless there is a version of tbe wg3526 that comes with m.2 there would be no way to set this modem up in that router. Another thing is the em7565 is cat 12 if you are just looking for cat 6 the mc7455 is perfect for that.
"If you're going to be ignorant, you'd better be rich." - Cody D.

User avatar
JimHelms
Site Admin
Posts: 900
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms » Tue May 08, 2018 10:34 am

The EM7565 can only be used in the WG3526 by using a Mini PCI-E to M.2 adapter.

User avatar
Jflex113
Posts: 25
Joined: Thu Mar 15, 2018 2:13 am
Location: Small town in Michigan

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 » Tue May 08, 2018 11:14 am

Is there enough room to fit it all inside of that router?
"If you're going to be ignorant, you'd better be rich." - Cody D.

User avatar
JimHelms
Site Admin
Posts: 900
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms » Tue May 08, 2018 11:21 am

Jflex113 wrote:
Tue May 08, 2018 11:14 am
Is there enough room to fit it all inside of that router?
There is. It is a little tricky to get the screws into place, and figure out which one should go where first, but it will work.

User avatar
Jflex113
Posts: 25
Joined: Thu Mar 15, 2018 2:13 am
Location: Small town in Michigan

Re: Linksys Wrt3200acm with EM7565

Post by Jflex113 » Thu May 10, 2018 1:20 am

Oh an I forgot to answer you question on would the custom ROOter work, yes it would it would just have to made for that router which can be done.
"If you're going to be ignorant, you'd better be rich." - Cody D.

eodgator
Posts: 2
Joined: Wed Dec 26, 2018 7:16 pm

Re: Linksys Wrt3200acm with EM7565

Post by eodgator » Wed Dec 26, 2018 7:46 pm

I'm planning on the same build, do you have any pointers?

eodgator
Posts: 2
Joined: Wed Dec 26, 2018 7:16 pm

Re: Linksys Wrt3200acm with EM7565

Post by eodgator » Wed Dec 26, 2018 7:57 pm

I forgot to ask how did you connect the EM7565 to the router?

User avatar
JimHelms
Site Admin
Posts: 900
Joined: Tue Dec 19, 2017 8:59 pm
Location: DFW Texas
Contact:

Re: Linksys Wrt3200acm with EM7565

Post by JimHelms » Wed Dec 26, 2018 9:00 pm

eodgator wrote:
Wed Dec 26, 2018 7:57 pm
I forgot to ask how did you connect the EM7565 to the router?
You will need a USB2.0 or USB3.0 to M.2 External Enclosure

Post Reply
  • Similar Topics
    Replies
    Views
    Last post