LTE HACKS

I've read elsewhere someone finding that somehow band locking doesn't do it. They were able to access tmobile bands when Sprint bands were truly not available, but not when they band locked. Odd really.

I would guess 65 or 66. Set it and check to see if your data is counting as hotspot data or not. Dont forget the ipv6 'ttl' (HL)

...A google search "DHCP packet received on wlan0 which has no address" seems to be an old OpenWrt firmware issue. This is why I recommend reloading the firmware. Likely something when goofy in the background and re firmware refresh will likely fix it. But try resetting it first and see if that cle...

Try the menu option --> System-->Backup / Flash Firmware --> Restore --> Reset to defaults and click the perform reset button

Your SIM card isn't being read. That is the number one issue I see in that picture. SIMcardnotread.png On pictures in posts: To add pictures, you need to have the file on your computer, then click the "Attachments" tab under the post text window. I'll add a picture of it on here: AddPics.png Click "...

Its likely because they are using the business group plans that are limited to 8Mbps. I'm not 100% on that though.

Might just be best to reload the firmware. You'll have to email sales@ltefix.com for that I think.

You will likely do best with omnis, though in this case if you still use directionals, a pair (or 2x2 MIMO single) flat panel directionals may work best. I think in your case a pair of 6+dbi omni-directional antennas will be your best bet. The higher the gain the better, as your signal numbers are l...

Also, you may need to change to MBIM mode. It is the protocol the modem uses to communicate with the router. Sometimes it matters. To make the change from QMI to MBIM run this command: AT+QCFG="usbnet",2 then AT+CFUN=1,1 Then when it comes back, run AT+CGDCONT? and see which APN profiles it has.

Did you try the others? It will error out if it is using that one. Run all the commands even if they error. Reboot the modem via the AT+CFUN=1,1 command. Then after it comes back run AT+CGDCONT? again Show us. Also show us the Modem--> Network Status screens after it has been on for a minute, even i...