to be able to see what band I am using

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Post Reply
photoacer
Posts: 7
Joined: Wed Jan 09, 2019 8:17 pm

to be able to see what band I am using

Post by photoacer » Sat Aug 17, 2019 1:46 pm

I am using Firmware Version OpenWrt SNAPSHOT r9614-b61495409b / LuCI Master (git-19.065.57576-61ea3ed) the model name is WE826-T2 I do not see what band I am using is there a way to see that I like the Firmware it stable and it runs faster the golden orb I have an MC7455

swwifty
Posts: 498
Joined: Thu Aug 30, 2018 8:21 pm
Location: NE GA Mountains

Re: to be able to see what band I am using

Post by swwifty » Mon Aug 19, 2019 2:51 pm

I imagine you'll have to use some software to send AT commands to the modem if you are just using plain old openwrt.

Maybe try the tool 'screen' ?

photoacer
Posts: 7
Joined: Wed Jan 09, 2019 8:17 pm

Re: to be able to see what band I am using

Post by photoacer » Mon Oct 21, 2019 3:21 am

what the tool screen?

swwifty
Posts: 498
Joined: Thu Aug 30, 2018 8:21 pm
Location: NE GA Mountains

Re: to be able to see what band I am using

Post by swwifty » Mon Oct 21, 2019 10:58 am

This is the tool I'm talking about: https://www.gnu.org/software/screen/manual/screen.html

You should be able to install it, then just run "screen /dev/YOURMODEMDEVICEHERE"

Post Reply
  • Similar Topics
    Replies
    Views
    Last post