ZBT WG1608, EM20-G, Page Plus, stuck connecting

Topics related to OpenWRT, LEDE, GoldenOrb, Linux and other firmware
Post Reply
mrconnerton
Posts: 4
Joined: Tue Aug 18, 2020 12:56 pm
Has thanked: 0
Been thanked: 0

ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by mrconnerton » Wed Sep 16, 2020 1:18 pm

Hello! I'm fairly new here. I've recently gotten a WG1608 with an EM20-G installed in it. I'm stuck as after following all the instructions provided, the modem simply shows connecting.
  • I've ensured the apn is set correctly
  • I've ensured the ttl is set correctly
  • I've tried both GoldenOrb_2020-06-10m GoldenOrb_2020-06-14, and then GoldenOrb_2020-06-10 again
  • I've tried custom modem ports for ttyUSB1
After reading through dozens of posts I get the impression my issue here is the EM20-G firmware trying to connect via /dev/ttyUSB2 and my solution to get connected is to downgrade the firmware via the details here.

Here is the output of my system log: https://pastebin.com/bpwJiH4W

I don't own an m.2/nvme to usb adapter so I have one ordered which will arrive Friday. I'm hoping that is my fallback plan and wanted to see if anyone here has this router / modem combo currently working. Thanks!

User avatar
Didneywhorl
Posts: 1195
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 327 times
Been thanked: 198 times
Contact:

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by Didneywhorl » Wed Sep 16, 2020 4:28 pm

The modem firmware downgrade isnt an issue if the modem is showing up.

Did you clear out all APNs then set the needed one?
The Solution for your Internet Connectivity and Speed.

mrconnerton
Posts: 4
Joined: Tue Aug 18, 2020 12:56 pm
Has thanked: 0
Been thanked: 0

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by mrconnerton » Wed Sep 16, 2020 4:35 pm

  • I set the apn to tracfone.vzwentp
  • I set the apn on the interface
  • One of the last times I redid everything from scratch I ran the command that resets the modem to OEM settings
Are there any other ways to "clear out all APNs"?

User avatar
Didneywhorl
Posts: 1195
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 327 times
Been thanked: 198 times
Contact:

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by Didneywhorl » Wed Sep 16, 2020 5:40 pm

Code: Select all

AT+CGDCONT=1; AT+CGDCONT=2; ETC; ETC
These commands are to set the APN, and can be used to clear them. At least one of them will fail, that is normal. Usually the first one.

Did you initialize the SIM in a phone?

If you ran

Code: Select all

AT+QPRTPARA=3
Then you for sure need to now run

Code: Select all

AT+QPRTPARA=1
Otherwise your modem wont save any settings after reboot.

I'm assuming you set the APN under Modem-->Connection Profile, in the web UI?
The Solution for your Internet Connectivity and Speed.

mrconnerton
Posts: 4
Joined: Tue Aug 18, 2020 12:56 pm
Has thanked: 0
Been thanked: 0

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by mrconnerton » Wed Sep 16, 2020 6:28 pm

BillA initialized the sim in a phone.
Yes I set the apn in Modem-->Connection Profile,.


I've taken the sim out of the router and put it in a phone to confirm it works. This is the signal just sitting at my desk:
Image

mrconnerton
Posts: 4
Joined: Tue Aug 18, 2020 12:56 pm
Has thanked: 0
Been thanked: 0

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by mrconnerton » Wed Sep 16, 2020 8:08 pm

And just fyi the modem is in fact showing up on the status page with the Modem IMEI , SIM IMSI, and SIM ICCID showing up, its just not detecting the phone number or the stats below.

BrandonDillon
Posts: 14
Joined: Mon May 04, 2020 2:36 pm
Has thanked: 4 times
Been thanked: 5 times

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by BrandonDillon » Thu Sep 17, 2020 9:29 am

This may or may not help, but when I had similar issues, Yipzy's advice sorted me out:

https://ltehacks.com/viewtopic.php?f=19 ... 327#p10327

I ran these commands and then rebooted the router and then input the APN again (through the UI)

Code: Select all

AT+QMBNCFG="AutoSel",0                                (stop Autoselect config on sim detection)
AT+QMBNCFG="Deactivate"                               (disable MBN config)
AT+CFUN=1,1                                           (reboot the modem)
My setup is a WG3526 and an EP06-A on PagePlus, so similar hardware.

Let us know how it works out. I've been wanting to build that exact setup for myself, but I've not seen any EM20-Gs for sale in a while.

averrslowly
Posts: 2
Joined: Thu Jun 25, 2020 2:19 pm
Has thanked: 0
Been thanked: 0

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

Post by averrslowly » Wed Sep 30, 2020 12:14 pm

@mrconnerton

Did you resolve this problem? I ask because I've ordered a WG1608 and was planning on getting an EM20-G.

Post Reply