Page 1 of 1

WG3526 with MC7455

Posted: Sun Apr 29, 2018 3:01 pm
by JimHelms
Carrier:
Sprint
Distance_to_Tower:
2.1 to 3 Miles
Type_of_Device:
WG3526-P Mounted inside Antenna Enclosure
Type_of_Modem:
Sierra Wireless MC7455
Firmware:
GoldenOrb
Antenna_Setup:
WiFix 2400-2700MHz WiFi 4G LTE 19dBi Directional MIMO Antenna (± 45° )
Cable_Type:
CAT6A Ethernet Cable
Speedtest_Photo_1:
Speedtest_Photo_2:

Re: WG3526 with MC7455

Posted: Sun Apr 29, 2018 8:59 pm
by Didneywhorl
Wow! Noice!

Re: WG3526 with MC7455

Posted: Mon Oct 01, 2018 5:54 pm
by cherub05
Carrier AT&T Band 30/12 aggregation I'm getting 45 down & 19.9 up but my ping is all over the place because of NAT444. The closest net hub to me is Chicago or Washington D.C. and I'm trying to locate the best VPN service that can provide me an addressable public IP to stabilize it. Any suggestions and what settings do I need to do in the router

Re: WG3526 with MC7455

Posted: Tue Oct 02, 2018 7:46 am
by Didneywhorl
I cant say Im super experienced here, but do you have a public ip from ATT? Sometimes you can request one for a few bucks more per month, though Im not familiar with ATTs offerings.

Also, why do you say NAT is causing ping issues.... I need to google "NAT444".

Re: WG3526 with MC7455

Posted: Tue Oct 02, 2018 1:00 pm
by cherub05
I'm using a MVNO provider on AT&T's network "NetBuddy". I am not on a publicly pulled IP address. What Double Nat essentially is: A carrier puts 100's possibly 1000's of its subscribers behind 1<----ONE! IP address! All but a few ports are open (strict NAT). This essentially breaks end to end internet. Kills gaming, increases lag, home security monitoring, some digital streaming services, controlling your thermostat before you get home, paying bills on line ect.. Should one person behind that shared IP address be breaking the law everyone behind that address is suspect!!!!!

Re: WG3526 with MC7455

Posted: Tue Oct 02, 2018 1:56 pm
by cherub05
As you can see I need to fix some things. I do believe a good VPN provider can help

Re: WG3526 with MC7455

Posted: Wed Oct 03, 2018 9:39 pm
by cherub05
UM, I don't think people are looking at the raw CMD reports..... those web based pics I gave are not at all consistent! I promise there is no malicious code in them.

Re: WG3526 with MC7455

Posted: Thu Oct 04, 2018 10:08 am
by Didneywhorl
:)