Help connecting NEXQ6GO-M Cellular WiFi Router

Misc Mini PCI-E and M.2 Modem Card Topics
Papabrosio
Posts: 9
Joined: Wed Nov 18, 2020 12:08 pm
Has thanked: 0
Been thanked: 0

Re: Help connecting NEXQ6GO-M Cellular WiFi Router

Post by Papabrosio » Sat Nov 21, 2020 2:54 pm

Thanks so much man, appreciate the help.

User avatar
Didneywhorl
Posts: 1293
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 361 times
Been thanked: 219 times
Contact:

Re: Help connecting NEXQ6GO-M Cellular WiFi Router

Post by Didneywhorl » Sat Nov 21, 2020 7:28 pm

Did you try the others? It will error out if it is using that one.

Run all the commands even if they error.

Reboot the modem via the

Code: Select all

AT+CFUN=1,1
command.

Then after it comes back run

Code: Select all

AT+CGDCONT?
again

Show us. Also show us the Modem--> Network Status screens after it has been on for a minute, even if it isn't connected, please.
The Solution for your Internet Connectivity and Speed.

User avatar
Didneywhorl
Posts: 1293
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 361 times
Been thanked: 219 times
Contact:

Re: Help connecting NEXQ6GO-M Cellular WiFi Router

Post by Didneywhorl » Sat Nov 21, 2020 7:31 pm

Also, you may need to change to MBIM mode. It is the protocol the modem uses to communicate with the router. Sometimes it matters.

To make the change from QMI to MBIM run this command:

Code: Select all

AT+QCFG="usbnet",2
then

Code: Select all

AT+CFUN=1,1
Then when it comes back, run

Code: Select all

AT+CGDCONT?
and see which APN profiles it has.
The Solution for your Internet Connectivity and Speed.

Papabrosio
Posts: 9
Joined: Wed Nov 18, 2020 12:08 pm
Has thanked: 0
Been thanked: 0

Re: Help connecting NEXQ6GO-M Cellular WiFi Router

Post by Papabrosio » Sat Nov 21, 2020 7:52 pm

Okay, did every command as requested and all came back with error. Even "usbnet"2. May be a different issue entirely.

Had some trouble putting pictures so uploaded it to my Drive: https://drive.google.com/file/d/1oJyAiz ... p=drivesdk

User avatar
Didneywhorl
Posts: 1293
Joined: Fri Mar 23, 2018 5:37 pm
Location: USA
Has thanked: 361 times
Been thanked: 219 times
Contact:

Re: Help connecting NEXQ6GO-M Cellular WiFi Router

Post by Didneywhorl » Sun Nov 22, 2020 9:16 pm

Your SIM card isn't being read. That is the number one issue I see in that picture.
SIMcardnotread.png
SIMcardnotread.png (80.68 KiB) Viewed 73 times

On pictures in posts:
To add pictures, you need to have the file on your computer, then click the "Attachments" tab under the post text window. I'll add a picture of it on here:
AddPics.png
Click "Place inline" button to add it where the cursor is in your post text. If it goes in the wrong spot you can just copy and paste the text it adds when you click that button.
The Solution for your Internet Connectivity and Speed.

Post Reply