I'm curious, though if it will work.
Topics related to Routers
Solved this as well
needed a modem reset (AT+CFUN=1,1 ) after changing usbnet to 2.
- Posts: 1803
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 597 times
- Been thanked: 349 times
Yeah. All Quectel modems need to be power cycled or run at+cfun=1,1 in order to change the protocol.
I got my m-PCI-e header in today. I went with an 8mm height one, from mouser.
Probably going to give it a try this weekend. I forgot to order 0.3mm solder so I need to source that, I'm not going to do this with 0.8mm solder.
As well as a USB -> mPCI-e adapter, Which I'm having no luck using. the EP06a is detected in my laptop as an EP06-a but the Golden Orb FW isn't shower anything under the modem tab when it's plugged into the USB port.
are there any settings that need to take place to use the USB adapter?
Honestly I'm finding the GO FW to be very clunky with a lot of re clocks and power cycles necessary to navigate to pages.
Anyone else running the openwrt-WG1608-GO2020-06-14-upgrade.bin version?
I have built this myself directly on the 1608.
Thanks to qmicli I have seen that the RM500Q is correctly aggregating (3CA for now) but the AT+QCAINFO is broken
and does not return anything.
I wonder, why couldn't rooter use qmicli to get its info instead of the modem AT interface?
It looks like there is much more info available there.
eist1 seems to have just made that one post and disappeared. From my reading of their post, they didn't actually use the kmod files. They just outlined what they thought needed to be done to retain the modem GUI. Did you try to compose a new snapshot with the kmod files?
I ask because I've just ordered a WG1608 ($87 incl. shipping) from ZBT.